How to Clean Glo Pals Characters and Cubes Without Damage

Quick answer

To clean Glo Pals characters and Light-Up Cubes without damage, hand wash them with mild soap and warm water, then air dry completely before storing. Never put them in the dishwasher, microwave, or boiling water. For mold prevention, drain and dry all pieces after every use, and sanitize with a diluted vinegar solution if needed.

Glo Pals characters and Light-Up Cubes turn bath time into a glowing adventure, but water play can leave behind soap residue, hard water spots, and the beginnings of mold if you skip regular cleaning. The good news: these toys are easy to care for when you know what to avoid.

This guide walks you through a safe cleaning routine that protects the electronics inside the cubes and keeps the characters ready for the next splash. Follow these steps to clean your Glo Pals without damage and keep them glowing for years.

What you'll need

Gather a few household items before you start: mild dish soap or castile soap, warm water, a soft cloth or sponge, a small soft-bristle brush (like a baby bottle brush or clean toothbrush), and a towel or drying rack. For sanitizing, keep white vinegar and water on hand. Avoid abrasive cleaners, bleach, and alcohol-based products, which can degrade the plastic and seals.

Never use a dishwasher, microwave, or boiling water on Glo Pals. The heat and harsh detergents can warp the plastic, damage the light mechanism, and break the watertight seal that keeps the cube working. Stick to hand washing for all components.

• Mild soap only — no bleach, alcohol, or abrasive scrubs.
• Soft brush for crevices; avoid sharp tools that can scratch.

Step-by-step cleaning routine

Start by removing the Light-Up Cube from the character. Rinse both the character and the cube under warm running water to remove loose dirt and soap film. Apply a drop of mild soap to a soft cloth or brush and gently scrub the surface, paying attention to seams and the cube's back slot. Do not submerge the cube for long periods; a quick wash is enough. Rinse thoroughly with clean water.

After rinsing, shake off excess water and pat dry with a soft towel. Place all pieces on a drying rack with good airflow. Make sure the cube's slot and the character's back opening are completely dry before reassembling or storing. If you notice any water inside the cube, let it air dry longer — trapping moisture can lead to mold and corrosion.

• Checkpoint: no soap residue left; water runs clear.
• Mistake to avoid: soaking the cube overnight.

How to sanitize Glo Pals safely

For a deeper clean or after illness, mix one part white vinegar with three parts water in a bowl. Wipe the character and cube surfaces with a cloth dampened with this solution, then rinse well with plain water. Do not soak the cube in vinegar solution for more than a minute, as acid can weaken the seal over time. Alternatively, use a toy-safe sanitizing wipe that is free of bleach and alcohol.

If you spot black spots that look like mold, especially in crevices, scrub gently with a vinegar-dampened brush. Rinse and dry completely. For persistent mold inside the cube, it's best to replace the cube — the seal may be compromised, and mold inside is hard to eliminate safely.

• Never mix vinegar with bleach — creates toxic fumes.
• Sanitize monthly or after any illness in the house.

Preventing mold and keeping the glow strong

Mold prevention starts with drying. After every bath, empty all water from the character and cube, shake them out, and leave them apart to air dry. Store them in a dry, ventilated spot — not in a sealed bin or a damp bathroom cabinet. If you live in a humid climate, a small fan or a drying rack near a window helps.

To keep the light bright, avoid leaving the cube in water for hours after play. The liquid-activated mechanism is designed for bath-time fun, but prolonged submersion can shorten battery life. When not in use, remove the cube from the character and store both dry. With this routine, your Glo Pals will stay clean, safe, and ready to glow.

• Checkpoint: all pieces bone-dry before storage.
• Mistake to avoid: storing wet toys in a closed container.

Your 5-step Glo Pals cleaning routine

1. Disassemble and rinse: Remove the Light-Up Cube from the character. Rinse both under warm running water to remove loose debris and soap. Checkpoint: no visible dirt or soap film remains.
2. Wash with mild soap: Apply a drop of mild dish soap to a soft cloth or brush. Gently scrub the character and cube, including seams and the cube slot. Mistake to avoid: using abrasive cleaners or scrubbing too hard.
3. Rinse thoroughly: Rinse all pieces under clean running water until no soap residue remains. Do not soak the cube. Checkpoint: water runs clear, no slippery feel.
4. Air dry completely: Shake off excess water and place pieces on a drying rack with good airflow. Ensure the cube slot and character opening are fully dry. Mistake to avoid: storing while damp — this invites mold.
5. Sanitize monthly (optional): Wipe surfaces with a diluted vinegar solution (1 part vinegar to 3 parts water), then rinse and dry. Never soak the cube for long. Checkpoint: no vinegar smell remains after rinsing.

Glo Pals products that fit this routine

• Alex® Light-Up Character: The Alex Character includes 2 Light-Up Cubes so the fun can begin right out of the box. Having two cubes means you can rotate them: one can be drying while the other is in use, making cleaning easier.
• Blair® Light-Up Character: Includes 2 Liquid-Activated Light-Up Cubes. Simply place a Light-Up Cube in the back of Blair, drop it into water, and watch it instantly glow. The cube is removable, so you can clean the character and cube separately without damaging the electronics.
• Glo Crew Character Bundle: Get all 5 Original Glo Pals! Insert your Glo Pals Light-Up Cube into the back of each Pal, drop it in the water, and watch them light up! With five characters, a simple drying routine helps you keep all of them mold-free and ready for play.

Cleaning Glo Pals takes just a few minutes and protects both the glow and your child's health. Stick to mild soap, warm water, and thorough drying — and skip the dishwasher. With this simple routine, your characters and cubes will stay bright, safe, and ready for countless bath-time adventures.